add wishlist add wishlist show wishlist add compare add compare show compare preloader
CR Touch Auto Bed Leveling Sensor for Ender-3/pro/V2/MAX,Ender-5/pro, CR-10 with 4.2.2/4.2.7 Motherboard
CR Touch Auto Bed Leveling Sensor for Ender-3/pro/V2/MAX,Ender-5/pro, CR-10 with 4.2.2/4.2.7 Motherboard
CR Touch Auto Bed Leveling Sensor for Ender-3/pro/V2/MAX,Ender-5/pro, CR-10 with 4.2.2/4.2.7 Motherboard
CR Touch Auto Bed Leveling Sensor for Ender-3/pro/V2/MAX,Ender-5/pro, CR-10 with 4.2.2/4.2.7 Motherboard
CR Touch Auto Bed Leveling Sensor for Ender-3/pro/V2/MAX,Ender-5/pro, CR-10 with 4.2.2/4.2.7 Motherboard
CR Touch Auto Bed Leveling Sensor for Ender-3/pro/V2/MAX,Ender-5/pro, CR-10 with 4.2.2/4.2.7 Motherboard
CR Touch Auto Bed Leveling Sensor for Ender-3/pro/V2/MAX,Ender-5/pro, CR-10 with 4.2.2/4.2.7 Motherboard
CR Touch Auto Bed Leveling Sensor for Ender-3/pro/V2/MAX,Ender-5/pro, CR-10 with 4.2.2/4.2.7 Motherboard
CR Touch Auto Bed Leveling Sensor for Ender-3/pro/V2/MAX,Ender-5/pro, CR-10 with 4.2.2/4.2.7 Motherboard
CR Touch Auto Bed Leveling Sensor for Ender-3/pro/V2/MAX,Ender-5/pro, CR-10 with 4.2.2/4.2.7 Motherboard
CR Touch Auto Bed Leveling Sensor for Ender-3/pro/V2/MAX,Ender-5/pro, CR-10 with 4.2.2/4.2.7 Motherboard
CR Touch Auto Bed Leveling Sensor for Ender-3/pro/V2/MAX,Ender-5/pro, CR-10 with 4.2.2/4.2.7 Motherboard
CR Touch Auto Bed Leveling Sensor for Ender-3/pro/V2/MAX,Ender-5/pro, CR-10 with 4.2.2/4.2.7 Motherboard
CR Touch Auto Bed Leveling Sensor for Ender-3/pro/V2/MAX,Ender-5/pro, CR-10 with 4.2.2/4.2.7 Motherboard

CR Touch Auto Bed Leveling Sensor for Ender-3/pro/V2/MAX,Ender-5/pro, CR-10 with 4.2.2/4.2.7 Motherboard

$48.00$58.00

This product is currently out of stock!

Unfortunately, we have not been informed when the product will be available again. Enter your email address to receive a notification when the product is back in stock.

  • Description
  • Reviews
  • 【Upgrade】 CR-Touch is a 3D printer platform levelling solution developed by Creality based on a vast amount of user data used by the developers. Compared to traditional automatic levelling, it is compatible with more 3D printer platforms, more stable and cost-effictive.
  • 【Multipoint detection & smart balancing】CR-Touch levelling sensor performs a multi-point detection on the printing platform and records the height of each detection point. The system creates a virtual mesh based on the elevation of each point and calculates the angle of inclination between the nozzle and the platform to automatically compensate for different points.
  • 【Long-lasting quality】The CR-Touch has a metal probe, which reduces wear and tear and extends the service life considerably.Tested service life of more than 100,000 uses.
  • 【Easy to install and easy to use】Download the CR-Touch program from the Creality official website and copy it to the TF / SD card. Insert the card directly into the card slot on the 3D printer. The program can be updated after switching on.
  • 【Compatibility】Applies to Ender 3 series / Ender 5 series / CR10 series with a 32-bit 4.2.2 / 4.2.7 motherboard.Compatible with PEI Glass Metal Magnetic flexible beds Carborundum glass build platform surfaces.